Crochet Patterns

THE CHROMA BEANIE AND COWL SET

Who doesn’t love a pattern set?

Today, I am going to share with you 2 patterns! Yes, that’s correct — 2 patterns in one post!

The Chroma Beanie & Cowl is a great set and is perfect for this cold wintertime! This set was made using the Chroma Twist Worsted Weight in Lupine yarn that We Crochet sent to me. This color-transitioning 2-ply twist yarn is such a great yarn perfect for any project like this beanie and cowl that we are going to talk about today! Also, this yarn is a blend of superwash wool and nylon which is absolutely great for cold weather.

Since we have 2 patterns, let’s begin with The Chroma Beanie pattern first!

This pattern is FREE here but you can also purchase the inexpensive PDF file on my Ravelry shop for easy printing and reading.  Purchasing the PDF file helps to support my blog and allows me to continue to share my patterns with you.

Favorite or buy it on Ravelry.
Pin it here for later use.

THE CHROMA BEANIE

SKILL LEVEL: Intermediate

MATERIALS

  • Worsted Weight (#4) Yarn | Chroma Twist Worsted Weight |Approximately 70 – 200 yards yards
  • Crochet Hook Size H | 5 mm (or size to obtain gauge)
  • Scissors
  • Tape Measure
  • Tapestry Needle
  • Stitch Marker
  • Optional: Your Favorite Pompom

GAUGE: 9 ESC and chs x 13 rounds = 4 inches

FINISHED MEASUREMENT: See Hat Size Chart and Guide

STITCHES AND ABBREVIATIONS | US Terminology

  • Ch(s) – Chain(s)
  • Inc – Increase (see Notes)
  • MR – Magic Ring
  • PM – Place Marker
  • Rep – Repeat
  • Sk – Skip
  • Sl St(s) – Slip Stitch(es)
  • SC – Single Crochet
  • ESC – Extended Single Crochet: Insert hook into the indicated stitch, yarn over, pull up a loop, yarn over and pull through one loop, yarn over and pull through remaining 2 loops.
  • BPESC – Back Post Extended Single Crochet: Insert hook into the indicated post (from the back of the post to front), yarn over, pull up a loop, yarn over and pull through one loop, yarn over and pull through remaining 2 loops.
  • FPESC – Front Post Extended Single Crochet: Insert hook into the indicated post (from the front of the post to back), yarn over, pull up a loop, yarn over and pull through one loop, yarn over and pull through remaining 2 loops.

NOTES

  1. Read the pattern carefully before starting.
  2. Not all heads conform to sizes by age; please measure for a more accurate fit. Please refer to the SIZES AND FINISHED DIMENSIONS above.
  3. This pattern is worked in the round, from the top down. Do not join rounds unless otherwise stated. Use a stitch marker to mark the beginning of the round and move as work progresses.
  4. Asterisks * * indicate repeat instructions between asterisks as many times as directed or repeat at specified locations.
  5. To increase (inc) means to work 2 (ESC, ch1) in 1 stitch à (ESC, ch 1, ESC, ch 1) in one stitch.
  6. The entirety of this pattern is worked into the stitch and skipping all chains unless otherwise stated.
  7. If you’re not familiar with Extended Single Crochet (ESC), watch this video.

PATTERN INSTRUCTIONS

NEWBORN

CROWN OF THE HAT

Round 1: With a MR, ch 1, work 6 SC into the ring. Pull tight the yarn tail to close the round. à 6 sts

Note: Remember to PM in the beginning of each round and move it as work progresses. You work the ESC into the ESC from the previous round skipping all chs.

Round 2: *ESC in the 1st st, ch 1*; Rep from * to * around. à 6 sts/chs

Round 3: Inc in each st around. à 12 sts/chs

Round 4: *Inc, (ESC, ch 1) in the next st*; Rep from * to * around. à 18 sts/chs

Round 5: *Inc, (ESC, ch 1) in the next 2 st*; Rep from * to * around (skipping all chains from the previous round). à 24 sts/chs

BODY OF THE BEANIE

Round 6: (ESC, ch 1) in each st around (skipping all chains from the previous round). à 24 sts/chs

Rep Round 6 until your beanie measures approximately 4 inches from the top. For the last round, sl st in the 1st st to close the round. Proceed to the BRIM pattern.

BRIM OF THE BEANIE

Round 7: Ch 1, *FPESC, ch 1, BPESC, ch 1*; Rep from * to * around (skipping all chains from the previous round). Sl st to join in the 1st st. à 24 sts/chs

Round 8 – 12: Rep Round 7.

Fasten off and weave in all ends.

Optional: Add your favorite pompom.

_________________________________________

3 – 6 MONTHS SIZE

CROWN OF THE HAT

Round 1: With a MR, ch 1, work 6 SC into the ring. Pull tight the yarn tail to close the round. à 6 sts

Note: Remember to PM in the beginning of each round and move it as work progresses. You work the ESC into the ESC from the previous round skipping all chs.

Round 2: *ESC in the 1st st, ch 1*; Rep from * to * around. à 6 sts/chs

Round 3: Inc in each st around. à 12 sts/chs

Round 4: *Inc, (ESC, ch 1) in the next st*; Rep from * to * around. à 18 sts/chs

Round 5: *Inc, (ESC, ch 1) in the next 2 st*; Rep from * to * around (skipping all chains from the previous round). à 24 sts/chs

Round 6: *Inc, (ESC, ch 1) in the next 3 st*; Rep from * to * around (skipping all chains from the previous round). à 30 sts/chs

BODY OF THE BEANIE

Round 7: (ESC, ch 1) in each st around (skipping all chains from the previous round). à 30 sts/chs

Rep Round 7 until your beanie measures approximately 4.5 inches from the top. For the last round, sl st in the 1st st to close the round. Proceed to the BRIM pattern.

BRIM OF THE BEANIE

Round 8: Ch 1, *FPESC, ch 1, BPESC, ch 1*; Rep from * to * around (skipping all chains from the previous round). Sl st to join in the 1st st. à 30 sts/chs

Round 9 – 13: Rep Round 8.

Fasten off and weave in all ends.

Optional: Add your favorite pompom.

_________________________________________

6 – 12 MONTHS SIZE

CROWN OF THE HAT

Round 1: With a MR, ch 1, work 6 SC into the ring. Pull tight the yarn tail to close the round. à 6 sts

Note: Remember to PM in the beginning of each round and move it as work progresses. You work the ESC into the ESC from the previous round skipping all chs.

Round 2: *ESC in the 1st st, ch 1*; Rep from * to * around. à 6 sts/chs

Round 3: Inc in each st around. à 12 sts/chs

Round 4: *Inc, (ESC, ch 1) in the next st*; Rep from * to * around. à 18 sts/chs

Round 5: *Inc, (ESC, ch 1) in the next 2 st*; Rep from * to * around (skipping all chains from the previous round). à 24 sts/chs

Round 6: *Inc, (ESC, ch 1) in the next 3 st*; Rep from * to * around (skipping all chains from the previous round). à 30 sts/chs

Round 7: *Inc, (ESC, ch 1) in the next 4 st*; Rep from * to * around (skipping all chains from the previous round). à 36 sts/chs

BODY OF THE BEANIE

Round 8: (ESC, ch 1) in each st around (skipping all chains from the previous round). à 36 sts/chs

Rep Round 8 until your beanie measures approximately 5.5 inches from the top. For the last round, sl st in the 1st st to close the round. Proceed to the BRIM pattern.

BRIM OF THE BEANIE

Round 9: Ch 1, *FPESC, ch 1, BPESC, ch 1*; Rep from * to * around (skipping all chains from the previous round). Sl st to join in the 1st st. à 36 sts/chs

Round 10 – 14: Rep Round 9.

Fasten off and weave in all ends.

Optional: Add your favorite pompom.

_________________________________________

1 – 3 Y/O (TODDLER) SIZE

CROWN OF THE HAT

Round 1: With a MR, ch 1, work 6 SC into the ring. Pull tight the yarn tail to close the round. à 6 sts

Note: Remember to PM in the beginning of each round and move it as work progresses. You work the ESC into the ESC from the previous round skipping all chs.

Round 2: *ESC in the 1st st, ch 1*; Rep from * to * around. à 6 sts/chs

Round 3: Inc in each st around. à 12 sts/chs

Round 4: *Inc, (ESC, ch 1) in the next st*; Rep from * to * around. à 18 sts/chs

Round 5: *Inc, (ESC, ch 1) in the next 2 st*; Rep from * to * around (skipping all chains from the previous round). à 24 sts/chs

Round 6: *Inc, (ESC, ch 1) in the next 3 st*; Rep from * to * around (skipping all chains from the previous round). à 30 sts/chs

Round 7: *Inc, (ESC, ch 1) in the next 4 st*; Rep from * to * around (skipping all chains from the previous round). à 36 sts/chs

Round 8: *Inc, (ESC, ch 1) in the next 5 st*; Rep from * to * around (skipping all chains from the previous round). à 42 sts/chs

BODY OF THE BEANIE

Round 9: (ESC, ch 1) in each st around (skipping all chains from the previous round). à 42 sts/chs

Rep Round 9 until your beanie measures approximately 6 inches from the top. For the last round, sl st in the 1st st to close the round. Proceed to the BRIM pattern.

BRIM OF THE BEANIE

Round 10: Ch 1, *FPESC, ch 1, BPESC, ch 1*; Rep from * to * around (skipping all chains from the previous round). Sl st to join in the 1st st. à 42 sts/chs

Round 11 – 15: Rep Round 10.

Fasten off and weave in all ends.

Optional: Add your favorite pompom.

_________________________________________

3 – 10 Y/O (CHILD) SIZE

CROWN OF THE HAT

Round 1: With a MR, ch 1, work 6 SC into the ring. Pull tight the yarn tail to close the round. à 6 sts

Note: Remember to PM in the beginning of each round and move it as work progresses. You work the ESC into the ESC from the previous round skipping all chs.

Round 2: *ESC in the 1st st, ch 1*; Rep from * to * around. à 6 sts/chs

Round 3: Inc in each st around. à 12 sts/chs

Round 4: *Inc, (ESC, ch 1) in the next st*; Rep from * to * around. à 18 sts/chs

Round 5: *Inc, (ESC, ch 1) in the next 2 st*; Rep from * to * around (skipping all chains from the previous round). à 24 sts/chs

Round 6: *Inc, (ESC, ch 1) in the next 3 st*; Rep from * to * around (skipping all chains from the previous round). à 30 sts/chs

Round 7: *Inc, (ESC, ch 1) in the next 4 st*; Rep from * to * around (skipping all chains from the previous round). à 36 sts/chs

Round 8: *Inc, (ESC, ch 1) in the next 5 st*; Rep from * to * around (skipping all chains from the previous round). à 42 sts/chs

Round 9: *Inc, (ESC, ch 1) in the next 6 st*; Rep from * to * around (skipping all chains from the previous round). à 48 sts/chs

BODY OF THE BEANIE

Round 10: (ESC, ch 1) in each st around (skipping all chains from the previous round). à 48 sts/chs

Rep Round 10 until your beanie measures approximately 6.5 inches from the top. For the last round, sl st in the 1st st to close the round. Proceed to the BRIM pattern.

BRIM OF THE BEANIE

Round 11: Ch 1, *FPESC, ch 1, BPESC, ch 1*; Rep from * to * around (skipping all chains from the previous round). Sl st to join in the 1st st. à 48 sts/chs

Round 12 – 16: Rep Round 11.

Fasten off and weave in all ends.

Optional: Add your favorite pompom.

_________________________________________

TEEN/SMALL ADULT SIZE

CROWN OF THE HAT

Round 1: With a MR, ch 1, work 6 SC into the ring. Pull tight the yarn tail to close the round. à 6 sts

Note: Remember to PM in the beginning of each round and move it as work progresses. You work the ESC into the ESC from the previous round skipping all chs.

Round 2: *ESC in the 1st st, ch 1*; Rep from * to * around. à 6 sts/chs

Round 3: Inc in each st around. à 12 sts/chs

Round 4: *Inc, (ESC, ch 1) in the next st*; Rep from * to * around. à 18 sts/chs

Round 5: *Inc, (ESC, ch 1) in the next 2 st*; Rep from * to * around (skipping all chains from the previous round). à 24 sts/chs

Round 6: *Inc, (ESC, ch 1) in the next 3 st*; Rep from * to * around (skipping all chains from the previous round). à 30 sts/chs

Round 7: *Inc, (ESC, ch 1) in the next 4 st*; Rep from * to * around (skipping all chains from the previous round). à 36 sts/chs

Round 8: *Inc, (ESC, ch 1) in the next 5 st*; Rep from * to * around (skipping all chains from the previous round). à 42 sts/chs

Round 9: *Inc, (ESC, ch 1) in the next 6 st*; Rep from * to * around (skipping all chains from the previous round). à 48 sts/chs

Round 10: *Inc, (ESC, ch 1) in the next 7 st*; Rep from * to * around (skipping all chains from the previous round). à 54 sts/chs

BODY OF THE BEANIE

Round 11: (ESC, ch 1) in each st around (skipping all chains from the previous round). à 54 sts/chs

Rep Round 11 until your beanie measures approximately 7 inches from the top. For the last round, sl st in the 1st st to close the round. Proceed to the BRIM pattern.

BRIM OF THE BEANIE

Round 12: Ch 1, *FPESC, ch 1, BPESC, ch 1*; Rep from * to * around (skipping all chains from the previous round). Sl st to join in the 1st st. à 54 sts/chs

Round 13 – 17: Rep Round 12.

Fasten off and weave in all ends.

Optional: Add your favorite pompom.

_________________________________________

LARGE ADULT SIZE

CROWN OF THE HAT

Round 1: With a MR, ch 1, work 6 SC into the ring. Pull tight the yarn tail to close the round. à 6 sts

Note: Remember to PM in the beginning of each round and move it as work progresses. You work the ESC into the ESC from the previous round skipping all chs.

Round 2: *ESC in the 1st st, ch 1*; Rep from * to * around. à 6 sts/chs

Round 3: Inc in each st around. à 12 sts/chs

Round 4: *Inc, (ESC, ch 1) in the next st*; Rep from * to * around. à 18 sts/chs

Round 5: *Inc, (ESC, ch 1) in the next 2 st*; Rep from * to * around (skipping all chains from the previous round). à 24 sts/chs

Round 6: *Inc, (ESC, ch 1) in the next 3 st*; Rep from * to * around (skipping all chains from the previous round). à 30 sts/chs

Round 7: *Inc, (ESC, ch 1) in the next 4 st*; Rep from * to * around (skipping all chains from the previous round). à 36 sts/chs

Round 8: *Inc, (ESC, ch 1) in the next 5 st*; Rep from * to * around (skipping all chains from the previous round). à 42 sts/chs

Round 9: *Inc, (ESC, ch 1) in the next 6 st*; Rep from * to * around (skipping all chains from the previous round). à 48 sts/chs

Round 10: *Inc, (ESC, ch 1) in the next 7 st*; Rep from * to * around (skipping all chains from the previous round). à 54 sts/chs

Round 11: *Inc, (ESC, ch 1) in the next 8 st*; Rep from * to * around (skipping all chains from the previous round). à 60 sts/chs

BODY OF THE BEANIE

Round 12: (ESC, ch 1) in each st around (skipping all chains from the previous round). à 60 sts/chs

Rep Round 12 until your beanie measures approximately 7.5 inches from the top. For the last round, sl st in the 1st st to close the round. Proceed to the BRIM pattern.

BRIM OF THE BEANIE

Round 13: Ch 1, *FPESC, ch 1, BPESC, ch 1*; Rep from * to * around (skipping all chains from the previous round). Sl st to join in the 1st st. à 60 sts/chs

Round 14 – 18: Rep Round 13.

Fasten off and weave in all ends.

Optional: Add your favorite pompom.

All done! Enjoy your new beanie!

_________________________________________

Now, let’s dive into The Chroma Cowl pattern!

THE CHROMA COWL

This image has an empty alt attribute; its file name is ravelry.png
Favorite or buy it on Ravelry.
This image has an empty alt attribute; its file name is pinterest.png
Pin it here for later use.

SKILL LEVEL: Intermediate

MATERIALS

  • Worsted Weight (#4) Yarn | Chroma Twist Worsted Weight | Approximately 200 – 300 yards
  • Crochet Hook Size H | 5 mm (or size to obtain gauge)
  • Scissors
  • Tape Measure
  • Tapestry Needle
  • Stitch Marker

GAUGE: 9 ESC and chs x 13 rounds = 4 inches

FINISHED MEASUREMENT

  • Child: 22 inches (circumference) x 8 inches (height)
  • Adult: 25 inches (circumference) x 10 inches (height)

STITCHES AND ABBREVIATIONS | US Terminology

  • Ch(s) – Chain(s)
  • PM – Place Marker
  • Rep – Repeat
  • Sk – Skip
  • Sl St(s) – Slip Stitch(es)
  • ESC – Extended Single Crochet: Insert hook into the indicated stitch, yarn over, pull up a loop, yarn over and pull through one loop, yarn over and pull through remaining 2 loops.
  • BPESC – Back Post Extended Single Crochet: Insert hook into the indicated post (from the back of the post to front), yarn over, pull up a loop, yarn over and pull through one loop, yarn over and pull through remaining 2 loops.
  • FPESC – Front Post Extended Single Crochet: Insert hook into the indicated post (from the front of the post to back), yarn over, pull up a loop, yarn over and pull through one loop, yarn over and pull through remaining 2 loops.

NOTES

  1. Read the pattern carefully before starting.
  2. This pattern is worked in the round, from the top down. Do not join rounds unless otherwise stated. Use a stitch marker to mark the beginning of the round and move as work progresses.
  3. This pattern is written as follows: Child (Adult)
  4. Asterisks * * indicate repeat instructions between asterisks as many times as directed or repeat at specified locations.
  5. The entirety of this pattern is worked into the stitch and skipping all chains unless otherwise stated.
  6. If you’re not familiar with Extended Single Crochet (ESC), watch this video.

PATTERN INSTRUCTIONS

Round 1: Ch 100 (120), being careful not to twist your chs, sl st in the very 1st ch to form a ring. Ch 1, ESC in the 1st ch, ch 1, sk 1 ch, *ESC in the next ch, ch 1, sk 1 ch*; Rep from * to * around. Sl st to join in the 1st st. à 50 (60) sts/chs

Round 2: Ch 1, FPESC into the 1st st, ch 1, sk 1 ch, BPESC in the next st, ch 1, sk 1 ch, *FPESC in the next st, ch 1, sk 1 ch, BPESC in the next st, ch 1, sk 1 ch*; Rep from * to * around. Sl st to join in the 1st st. à 50 (60) sts/chs

Note: You work the Front Post into the FPESC from the previous round and BPESC into the BPESC from the previous round, skipping the chs in between sts.

Round 3 – 5: Rep Round 2.

Note: After Round 5, we will be working in the round/spiral. Remember to PM in the beginning of each round and move it as work progresses. You work the ESC into the ESC from the previous round, skipping all chs.

Round 6: Ch 1, ESC in the 1st st, ch 1, sk 1 st, *ESC in the next st, ch 1, sk 1 st*; Rep from * to * around.

Rep Round 6 until your cowl measures approximately 7(9) inches from the top or Round 1. For the last round, sl st in the 1st st to close the round.

Round 7 – 11: Rep Round 2.

Fasten off and weave in all ends.

All done! Enjoy your new cowl!

I hope that you like this pattern set as I enjoyed designing and creating it! Please don’t forget to tag me on Instagram @stringsandcuddles when sharing your wip(s) and finished beanies and cowls so I could see and share them! Please use #thechromabeanie and #thechromacowl when sharing!

To download the PDF copy of THE CHROMA BEANIE & COWL and my other patterns, please visit my Ravelry shop.

Stay safe and happy crocheting!

XOXO,

Elisa

***

All images and patterns are the copyrighted property of STRINGS AND CUDDLES. You may sell any items that you make from this pattern. You may NOT use my images.  Please DO NOT copy, redistribute or claim as your own. If selling items from this pattern, please give credit to STRINGS AND CUDDLES by linking to my shops or on social media @stringsandcuddles.

I would love to see what you create! Please use these hashtags to share: #stringsandcuddles, #stringsandcuddlesdesigns, #thechromabeanie and #thechromacowl

Please don’t hesitate to reach out for questions regarding this pattern.

Connect with me Instagram | Pinterest | Facebook | Blog | Ravelry

***

One thought on “THE CHROMA BEANIE AND COWL SET

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.